Battery Monitoring System
The BMS has 3 LED’s, which indicate the following:
BMS standard with CLS and temperature sensor
The ABERTAX® BMS - STANDARD is our basic version for battery monitoring. Three LEDs are integrated in a 45x45x21mm housing that can be placed on top of the battery cells. The external level probe can be placed in the centre of the battery. The temperature sensor can either be placed outside or inside the cell. A full and half voltage reading is available. Actual and accumulated battery data is stored inside the BMS and can be uploaded via a USB interface to the PC.
- Integrated LED's
- external level probe
- Gauge Guard or O-Ring
- Temperature sensor inside or outside cell
- Various connector types
-
Parameters
- Battery Technology :
- Lead-Acid (Open Type or VRLA)
- Input / Supply Voltage :
- Rated Voltage ±50%
- Max. Operating Volt. (12VDC nom.) :
- 36VDC
- Max. Operating Volt. (24V - 80VDC nom.) :
- 120VDC
- Min. Operating Volt. (12VDC nom.) :
- 6VDC
- Min. Operating Volt. (24V - 80VDC nom.) :
- 12VDC
- Current Consumption 12 - 80VDC :
- < 20mA
- Max. Current measurment range :
- n.A.
- Operational Temp. Range :
- -30°C to +70°C
- Communication :
- Serial Interface 9.6K Baud, 3.3V
- Temp. Sensor Range :
- -40°C to +100°C
- Relative Humidity in Operation :
- < 80%
- Relative Altitude :
- Up to 2000m ASL
- Protection class :
- IP65
- CLS type :
- 77mm or 127mm
- Diameter hole for Gauge Guard :
- 10mm (M10 drill)
- Temperature probe type :
- inside or outside cell
- Dimensions (L x W x H) :
- 45x45x21 mm ± 0.5 mm, (excluding cables & sensors)
- Weight w. stand. version approx. :
- 100g
- Brochure (PDF) :
- View