Home » Products » BMS

Battery Monitoring System

The ABERTAX® BMS is another quality product from Abertax Technologies. It gives essential battery information i.e. full voltage, half voltage, temperature and electrolyte level. It stores the number of charge/discharge cycles, temperature, electrolyte low level duration and deep discharge duration.
 

The BMS has 3 LED’s, which indicate the following:

–        Flashing green: when powered and no warnings
–        Flashing red: electrolyte level below specified minimum for flooded batteries and low voltage
–        Flashing yellow: battery temperature above 50°C
 
 
Contact Form with Product request

BMS standard with CLS and temperature sensor

The ABERTAX® BMS - STANDARD is our basic version for battery monitoring. Three LEDs are integrated in a 45x45x21mm housing that can be placed on top of the battery cells. The external level probe can be placed in the centre of the battery. The temperature sensor can either be placed outside or inside the cell. A full and half voltage reading is available. Actual and accumulated battery data is stored inside the BMS and can be uploaded via a USB interface to the PC.

-        Integrated LED's
-        external level probe
-        Gauge Guard or O-Ring
-        Temperature sensor inside or outside cell
-        Various connector types

BMS standard with CLS and temperature sensor and external LED

The ABERTAX® BMS - STANDARD is our basic version for battery monitoring. Three LEDs are integrated in a 45x45x21mm housing that can be placed on top of the battery cells. The external level probe can be placed in the centre of the battery. As an option the level status can be displayed also on an external LED. The temperature sensor can either be placed outside or inside the cell. A full and half voltage reading is available. Actual and accumulated battery data is stored inside the BMS and can be uploaded via a USB interface to the PC.

-        Integrated LED's
-        external level probe
-        external LED for electrolyte level
-        Gauge Guard or O-Ring
-        Temperature sensor inside or outside cell
-        Various connector types

  • Select Product Options

    Please select company type in the mentioned groups.

    Please enter your country.


    Product Definition

    Please select the type of Battery the e2BMS will be used on. The version for flooded batteries includes a CLS and thermal sensor for the battery. The AGM/GEL Version only has a thermal sensor for the battery.

    Enter another DC voltage if not available in the selection above. Maximum nominal voltage is 80VDC. Minimum voltage 12VDC.

    Choose your battery pole connector type. We recommend the following: WLW – Bolted battery connectors Terminal Connector – Welded battery connectors Standard – Usage of own battery connector

    Select the CLS probe length (if any) you require or enter the specific length in the field below

    If you need a specific length of the CLS probe, please specify the length of the probe, measured from the top of the battery lid to the top of the battery plates.

    Here you can select if you require and external LED indication for the CLS


    Please enter any comments to your request.


    My consent into commercial communication

    I would like to be commercially contaced by ABERTAX Group of companies through the following communication channels. For details please see our Data Privacy Statement.

    You confirm that you have read the Data Security Statement of Abertax and agree that your contact data is stored according the Data Security Statement. Your consent can be rewoked by sending an email to datasecurity@abertax.com.