Description
All the advantages of a scientific data logger with the durability of our acid-proof sensors and housing. Analyze your batteries in any environment! Measurement and recording of full and mid-pack voltage, current, ambient and battery temperature, and electrolyte level. Fast logging at up to 10 samples per second. A 32GB data storage provides up to 700 million samples (> 24 years @ 1 sample per second). Embedded web interface is available to configure, start, stop and downloaded data.
High brightness LEDs show the device status. Some sensors on the AT114B are optional and can be omitted upon ordering according to the type of battery to be investigated. A low voltage version is available for 12V battery applications.
Sensors and Options
- Pack voltage
- Mid-pack voltage
- Temperature: Ambient & Battery (Optional)
- Level sensor (Optional)
- Current Sensor (Optional)
Applications
- Fault investigation
- Sizing batteries
- Battery powered load analysis
- Validation of battery powered systems
- Battery validation
Specifications
| Battery Technology: | All Types |
| Communication: | Wi-Fi / Wi-Fi AP |
| Nominal Supply Voltage (HV Version): | 15V – 120V |
| Nominal Supply Voltage (LV Version): | 6V – 30V |
| Maximum Current Consumption: | 0.11A |
| Operating Temperature Range: | -20°C to +70°C |
| Operating Relative Humidity Range: | 95% (No Dew) |
| Maximum Operating Altitude: | <2000m ASL |
| Protection Class: | IP65 |
| Dimensions Excluding Sensors: | 130 * 45 * 25mm |
| Weight Excluding Sensors: | 200g |
Measurement Specifications
| Voltage Measurement Accuracy: | ±0.2V |
| Voltage Measurement Resolution: | 0.08V |
| Current Measurement Accuracy: | 3% 3A |
| Current Measurement Resolution: | 0.1A |
| Temperature Sensor Range: | -40°C to +100°C |
| Maximum Current Measurement Range: | ±900A |
| Full Voltage Measurement Range: | 6V – 120V |
| Half-Pack Voltage Measurement Range: | 8V – 60V |
| For Flooded Lead Acid Batteries | |
| Level Sensor Probe: | 77mm or 127mm |
| Probe Protection Type: | Gauge Guard or O-Ring |
| Hole Diameter for Gauge Guard: | 10mm |
Images
