Capacitive Electrolyte Level Sensor
The ABERTAX® CLS – is the entry level product for monitoring the electrolyte level in a battery. The level probe is integrated in the LED housing, giving a steady GREEN signal, when electrolyte level is above the cell plates. When the electrolyte level drops below the cell plates, the sensor switches to flashing RED.
CLS Standard
The ABERTAX® CLS - STANDARD is our basic version for monitoring the electrolyte level in a battery. The level probe is integrated in the LED housing, giving a steady GREEN signal, when electrolyte level is above the cell plates, and turning to flashing RED, when the electrolyte level is below the cell plates. Please follow the attached installation instruction. To install the CLS, you either drill a hole in the cell lid and use the Gauge Guard version for sealing and measuring the probe length, or you make use of the air agitation hole. For this installation you need the O-ring version.
- Integrated LED
- Integrated level probe
- Gauge Guard or O-Ring
- Various connector types
-
Parameters
- Input / Supply Voltage :
- 12V (6 x 2V cells)
- Max. Operating Volt. (12VDC nom.) :
- 18VDC
- Min. Operating Volt. (12VDC nom.) :
- 10VDC
- Current Consumption 12VDC :
- <20mA
- Operational Temp. Range :
- -30°C to +70°C
- Temperature Sensor Range :
- n/a
- Relative Humidity in Operation :
- 95% no dew
- Relative Altitude :
- Up to 2000m ASL
- Protection class :
- IP65
- Weight w. stand. version approx. :
- 60g
- Diameter probe (including seal) :
- 5mm
- Diameter hole for Gauge Guard :
- 10mm (M10 drill)
- Dim. Sensor head :
- 30mm diameter, 20mm heights
- Dim. Sensor bet. supply cable :
- 27mm between cable grommets in housing. 31mm diameter of circular housing
- Product Catalogue :
- View